Back to topThe main features
Industrial design, SMT process
Provide desktop, concentrated plug-in chassis 2 kind of way
High-speed real-time digital transmission technology, image compression, delay;
Super optical dynamic range, the design of the plug and play, easy installation, and the use of advanced adaptive technologies, when using do not need to adjust support hot plug;
Low electromagnetic interference, radio frequency interference, no current;
Low electromagnetic environment security transmission;
Low industrial data connector terminal;
Low FC/ST optical connector;
Low field opened free debugging
Low offer two-way asynchronous data (forward and reverse)
Asynchronous data can provide 1 road, transmission rate can reach more than 115.200 Kbps
low video port, audio data port, port adopts two levels of lightning protection technology;
Enlarge imageBack to topLow fiber features
Interface: FC/SC
transmission wavelength: 1310nm/1550nm
Transmission distance: 0 ~ 20 km (single mode fiber, standard)
0 ~ 60 km (single mode fiber, long distance)
0 ~ 100 km (single mode fiber, super long distance)
0 ~ 2 km (multimode fiber, standard)
Emission light power: better than - 8 db
Receiving sensitivity: better than 18 db
Optical dynamic range: 10 db
Optical allows biggest chain damage: 10 db
Low video features
Video channels: 8
Interface terminals, BNC connector jack
Video bandwidth: 5 hz ~ 10 MHZ
The differential gain: < 1% (typical)
Differential phase: < 0.8 ° (typical)
Leaning oblique: < 0.5% (maximum)
Signal to noise ratio: > 67 db
Input/output impedance: 75 Ω (non equilibrium)
Input/output voltage: 1.0 Vpp (typical)
Low data features
Reverse data channels: 1 road
Interface：RS232 / RS485 / RS422
Work mode: full duplex/half duplex
Wave rate: 0 ~ 100 KBPS
Error code rate: < 1 x 10 to 9
Back to topThe working conditions
Working temperature: - 10 ℃ ~ + 50 ℃
Working humidity: 0 ~ 95% (without condensate)
Power consumption: 5.0 W @ DC 5 v
No solvent and corrosive gas, no dust, no strong magnetic field interference
